Skip to product information
1 of 1


ProEFi PRO48-701 ECU

ProEFi PRO48-701 ECU

Regular price £1,290.00
Regular price £1,048.50 Sale price £1,290.00
Sale Sold out
Quick Info SKU: 9130-Pro48ECU Category: 1JZ / 2JZ Tags: 1JZ / 2JZ ENGINE MANAGEMENT / ECU SUPRA 1993-2002 JZA80

ProEFi PRO48-701 ECU.

The Pro48 is a great budget friendly solution for the individual who needs a stand alone, but doesn’t need all the bells and whistles.
Processor The Pro48 uses the superfast MPC563 56mhz Processor
Drive By Wire Yes
Injectors 4 Peak n Hold
Coils 8
TPS Yes – Adaptive
Coolant Temp Yes
Air Temp Yes
Map Sensor Yes – Unlimited Range
Flex Fuel Yes – requires additional signal conditioning
Idle Control Pulse Width and Stepper motor – Adaptive
Wideband O2 External driver required 2 channel cabable
Cam Yes – Hall/VR capable
Crank Yes – Hall/VR capable
Variable Cam Yes
Traction Control CAN based applications Only!
Nitrous Control 4 Stages. V.E. Based****
Boost Control Multiple control strategies.***
Launch Control Multiple control strategies.***
Fuel Pump Control Yes*
Analog Inputs 14*
Low Side Outputs 6 6amp capable Low Side outputs*
Tach Yes – Software configurable
Digital Inputs
High Current Bridges 1 Channel set – Used for Stepper motor control
Speed Inputs None
Drive By Wire Yes
Fault Coding Safety Yes**
MIL (CEL) Yes – Malfunction indicator with fault codes
Main Relay Control Yes
5v Ref 1 location
Sensor Grounds 1 location
Key Switch Power Yes
Permanent Power Yes
Battery Backup No
Chassis Ground 2 Locations
Can Channels 1 Channel
Serial Connection No
RS485 Connection No
Internal Memory Limited to Fault logic
USB Direct Connection USB on PC, Can connection at ECU

Environmental Specifications

Logging with PC attached included on all ECU’s. If logging without the PC connected is required, you must purchase one of the external loggers. This module simply connects through the CAN bus and is configurable, however it is preconfigured by Pro EFI for common channels to be logged.
  1. The amount of available channels is dependent upon the use of pre configured I/O such as Fuel pump, TPS, etc…
  2. Fault coding is a strategy used by the O.E. manufacturers. This strategy allows for the capability to trigger faults and fault actions. Features include but are not limited to multiple safety strategies for limiting boost and shutting off nitrous control under lean conditions. See your Authorized Professional EFI Dealer for more information.
  3. Multiple Strategies are configurable based upon time or speed. See your Authorized Professional EFI Systems Dealer for more information.
  4. V.E. stands for volumetric efficiency. This is a strategy incorporated by the O.E. manufacturers to more accurately determine the fueling requirements of the engine. There are several advantages to using this method. See your Authorized Professional EFI Systems Dealer for more information.
  5. These communication ports are dedicated for the use of future external peripherals to be announced by Professional EFI Systems at a later date.
Adaptive – Is a term meaning that particular feature will self tune itself constantly. This is another strategy used by the O.E. manufacturers to help keep the vehicle in a constant state of tune for hundreds of thousands of miles.
View full details

You may also like